Free Baby Bib Pattern now available in Four Sizes! Learn how to sew a quick and easy baby bib. It will make a great baby shower gift for any new mama.

Click Below to Get the Pattern

More Baby Sewing Projects For You:

• 50+ Cutest Baby Sewing Projects
• Burp Cloth Pattern - 3 Styles
• Side Snap Baby Bib Pattern
• FREE Top Knot Baby Hat Sewing Pattern
• FREE Basic Baby Hat Sewing Pattern
• How to Make a Sherpa Fleece Baby Blanket
• Minky Crib Sheet Tutorial
• Knot Bow Headband Pattern
• Easy Newborn Baby Swaddle Blanket
• Simple Squares Baby Quilt Pattern

The baby bib pattern comes in 4 available sizes:

• Newborn
• 3-6 Months
• 6-12 Months
• 1-4 Years

What are the Finished Baby Bib Sizes?

Width x Length

• Newborn: 7.5" x 10"
• 0-3 Months: 9.25" x 10.5"
• 6-12 Months: 10" x 11"
• Toddler: 1 - 4 Years: 10" x 12.5"

Be sure to sign up for the Blog Freebie Resource Library to access the baby bib pattern in 4 Sizes.

Baby Bib Supplies List:

• 2 Fat Quarters of Cotton, Flannel, Terry Cloth, or Minky Fabric
• Baby Bib Pattern Template (Available in the Resource Library - Sign up to Access)
• KAM Snaps, Metal Snaps or Velcro
• Pins or Wonderclips
• Sewing Machine Needle
• Thread
• Scissors or Rotary Blade and Cutting Mat

Watch the Youtube Video

Baby Bib Pattern Tutorial

Step One: Cut out Two (2) of the Baby Bib Pattern Pieces as shown above. In the tutorial pictured above, I cut one from cotton fabric and one from Terry cloth to make it more absorbent. You can choose to cut both the front and back from the same type of fabric.

Step 2: Place Baby Bib pattern piece over fabric rectangle (or pattern piece) with Right Sides of Fabric facing each other. Pin in Place. Stitch around edges using a 1/2” seam. Stop two inches from starting place leaving and opening as shown above.

Step 3 - Clip notches around the outer curves curves and snip straight clips around the inner curves. This will help the fabric on the bib to sit smoothly without wrinkles when turned right side out.

Step 4 - Cut a 1/4" deep into the seam allowance on each side of the opening, as shown above

Step 5 - Then trim the seam allowance down to 1/4" around the entire bib leaving a small extended flap on the bottom.

Step 6 - Turn the bib right side out, rolling the seam allowance flat around the edges. Press with iron to help eliminate the bulky seam allowance.

Step 7 - Tuck the half inch flap on the opening under so it sits flush with the edge of the bib and press to set. Pin in place.

Step 8 - Top stitch 1/8" around the perimeter of the bib to close the opening and give the baby a bib a professional finish. Press the bib one more time.

Step 9 - Add KAM Snaps or velcro to the baby bib to open and close the bib.

Step 10 - You are all finished. Give the bib to an adorable baby and make some more!

Sign up for the free newsletter here to get the bib pattern for free by email – and tons of other goodies!

OR

***** You can find the Free Bib Pattern in the Resource Library. Sign up to Access.

Pin the Baby Bib Pattern to Save for Later

***If sewing the Bibs and Burp Cloths with Flannel you may also find These MUST HAVE TIPS FOR SEWING WITH FLANNEL FABRIC helpful.